Not a classification, not a part number...
Damper Holder tool
Part No.: AR042
Price: $18.00
Description:
This tool is a handy way to hold the damper on any Mopar V8 engine when installing or removing the crankshaft bolt. The tool is designed to work with a ½ drive breaker bar. Tool is made from heat treated steel. Fits the standard Mopar 6 bolt damper pattern. SB, BB and Hemi engines.
Dealers: Mancini Racing, Hughes Engines, Richard Ehrenberg
Big Block
Part No.: AR008
Price: $25.00
Description:
Big block throttle return kit with dual return springs. Fits B and RB motors. Designed for standard high rise intake manifolds such as the Performer RPM, M1, Torker, Street Dominator, Victor, etc. For Indy heads and manifolds use the taller AR119.
Used With: AR002, AR002B, AR005, AR005B
Dealers: Mancini Racing, Hughes Engines, Bob Mazzolini Racing, Richard Ehrenberg
Tall bracket kit, 413, 426W, 440
Part No.: AR002
Price: $55.00
Description:
Tall throttle bracket kit for 413, 426W and 440 RB engines. This bracket is taller than the factory bracket so it fits aftermarket intakes such as the Performer RPM and M1. The top of the bracket can be adjusted to work with different intake manifold heights or to accomodate a carb spacer. A mount for a cable kickdown is included. Use with AR008 throttle return kit for best results.
Used With: AR008
Dealers: Mancini Racing, Hughes Engines, Bob Mazzolini Racing, Richard Ehrenberg
Instructions: View PDF File
A-body
Part No.: AR013
Price: $85
Description:
A body spring hanger. Replacement hanger, also fits Super Stock springs. 5/8 diameter eye bolt. Made from 0.188 steel, zinc plated. Uses OEM quality hanger studs. Add the AR108 hanger reinforcement plates for extra strength.
Used With: AR108
Dealers: Mancini Racing
Offset MC adapter,Hemi A body, 2 stud MC
Part No.: AR060
Price: $85
Description:
Originally designed for Hemi A-body cars to move the master cylinder over for valve cover clearance, this adapter can be used in any vehicle with the standard four-bolt pattern on the firewall. This adapter is designed to work with the lightweight two-bolt aluminum master cylinder.
A longer pushrod is required due to the thickness of this adapter. The pushrod also needs to be relocated to the other side of the brake pedal. Adjustable brake pushrods are available from vendors such as DoctorDiff.
Dealers: Mancini Racing, Bob Mazzolini Racing, Doctor Diff, Reilly Motorsports, Richard Ehrenberg
B/E/A Body Cars
Part No.: AR012
Price: $24
Description:
Stiffen up your lower control arms by welding on the LCA Box Plate Kit from AR Engineering. The AR012 kit contains two steel plates which can be welded onto A, B, or E-body lower control arms. Used on the Green Brick!
AR012 will fit all E-body cars and all A-body cars, as well as 1962-1972 B-body cars.
Dealers: Mancini Racing, Firm Feel, Richard Ehrenberg
Fuel pump blockoff, billet, big block Mopar
Part No.: AR123
Price: $30
Description:
Fuel pump block off plate with 1/8 NPT port for pan vacuum fitting. CNC machined from billet aluminum. 3/8 thick for leak free operation. Fits SB, BB and Hemi motor.
Dealers: Mancini Racing, Hughes Engines, Bob Mazzolini Racing, Richard Ehrenberg
MSD Blaster, big block
Part No.: AR306
Price: $20
Description:
The AR306 coil bracket mounts the MSD Blaster SS coil coil on the valley rail of a big block engine. Works best with high rise single plane intake manifolds such as the Victor or M1. Coil bracket can be mounted on either side of the intake valley, or even at the rear of the engine.
Dealers: Mancini Racing, Hughes Engines, Bob Mazzolini Racing
B/E body, CNC profiled
Part No.: AR133
Price: $225
Description:
CNC machined motor plate for B-body and E-body cars. Plate is made from 0.375 thick 6061-T6 aluminum plate for extra strength and stiffness. The plate measures 35.25 inches wide and the engine is offset 1.25 inches towards the passenger side of the car. The AR133 plate is profiled machined to match the AR224 billet timing chain cover, but it will also clear a stock timing cover as well as a Jesel belt drive. The AR140 pulley spacer is available to align the crankshaft pulley with the water pump pulley.
Motor plate mounts the engine in the stock location so headers and oil pans should fit correctly. Use motor plate mounting kit AR121 to hold the motor plate to the frame rails. The AR207 motor plate alternator kit is available as an option
Used With: AR140, AR121, AR207, AR224
Dealers: Mancini Racing
Camber spacers, kit
Part No.: AR324
Price: $24
Description:
Four spacers that fit between the steering knuckle and the lower ball joint to increase camber. Designed for autocross or road racing. Use on street cars will increase tire wear. Adds 2 degrees of camber.
Dealers: Mancini Racing, Bob Mazzolini Racing, Firm Feel
Mopar B-Body Performance Upgrades 1962-1979
Part No.: SA191
Price: $25.00
Description:
Dealers: Mancini Racing, Hughes Engines
How to Build Max-Performance Mopar Big Blocks
Part No.: SA171
Price: $25.00
Description:
How to design and assemble a 600+ horsepower Mopar. This book covers the latest cylinder heads, blocks, stroker kits, intakes, oil pans, etc. available for the big block Mopar engine. Covers 383, 400, 413, 426W and 440 engines. Shows how to build low cost 500+ cubic inch big blocks, as well as covering high end parts such as belt drives, belt drive distributors and dry sump systems.
Dealers: Mancini Racing, Hughes Engines, Bob Mazzolini Racing