Part No.: AR213

Price: $20.00

Description:

AR213 – Dust cap installer tool is used to install the dust caps on the front hubs of later model rear wheel drive Mopar vehicles.  This tool is designed to fit dust cap #3580894 which fits all the 1973 or newer model A,B and E body cars.  The 3580894 dust cap fits the 1973 or newer disc brake knuckle which is very popular to retrofit to earlier vehicles.  Without this tool the dust cap is often dinged or smashed during installation.  This tool fits on the reinforced edge of the dust cap and allows a person to strike the dust cap squarely with a hammer without causing any damage.

Dealers: Mancini Racing, Hughes Engines, Richard Ehrenberg

Part No.: AR222

Price: $25.00

Description:

AR222 – Seal installer for wheel bearing seals.  This tool is designed to install the inner wheel bearing seal for 1973 or newer brake rotors.  Tool fits seal number 3580723.

Dealers: Mancini Racing, Richard Ehrenberg

Part No.: AR263

Price: $18.00

Description:

AR263 – Damper holding tool for BB Chevy bolt pattern.  Use this tool to hold the damper when using a damper with the 3.20 inch Chevy bolt circle.  Designed for use with the ATI damper #917120 which has a BB Chevy bolt pattern.  Made from heat treated tool steel, this damper holder works with a ½ drive breaker bar.

Dealers: Mancini Racing, Hughes Engines, Richard Ehrenberg

Part No.: AR303

Price: $19.00

Description:

AR303 – Crankshaft Holding Tool.  This tool bolts onto the crankshaft flange to hold the crank while installing the damper bolt.  Fits either 6 bolt or 8 bolt crankshafts.  Made from high strength, heat treated, steel.  Use with a ¾ inch drive breaker bar.

Dealers: Mancini Racing, Hughes Engines, Richard Ehrenberg

Part No.: AR308

Price: $15.00

Description:

AR308 – Crankshaft Holding Strap.  Simple tool that can be used to hold the crankshaft in place when installing or removing the damper bolt.  One end of the strap attaches to the crankshaft flange while the other attaches to the bellhousing flange.  Tool fits SB, BB and Hemi motors.  Fits either 6 bolt or 8 bolt crankshafts.

Dealers: Mancini Racing, Hughes Engines, Richard Ehrenberg

Part No.: AR319

Price: $22

Description:

Valve train checking plate for small block Mopar engines.  This tool is an easy way to mount a dial indicator to the cylinder head.  The tool is made from steel so magnetic base dial indicators can be used.  The tool also has a pattern of holes for bolt down dial indicators.

Dealers: Mancini Racing, Hughes Engines

Part No.: AR083

Price: $22

Description:

Valve train checking plate.  This tool fits big block or Hemi motors and is an easy way to mount a dial indicator to the cylinder head.  The tool is made from steel so magnetic base dial indicators can be used.  The tool also has a pattern of holes for bolt down dial indicators.

Dealers: Mancini Racing, Hughes Engines, Richard Ehrenberg

Part No.: AR069

Price: $22.00

Description:

Rear end yoke holder tool.  This tool is an easy way to hold the rear end yoke when tightening or removing the pinion nut.  The tool is designed to work with a ¾ inch drive breaker bar.  The AR069 tool is made from heat treated steel and is capable of holding 600 ft-lbs of torque.  This tool fits all popular yoke bolt patterns used on Mopar vehicles.

Dealers: Mancini Racing, Hughes Engines, Richard Ehrenberg

Part No.: AR042

Price: $18.00

Description:

This tool is a handy way to hold the damper on any Mopar V8 engine when installing or removing the crankshaft bolt.  The tool is designed to work with a ½ drive breaker bar.  Tool is made from heat treated steel. Fits the standard Mopar 6 bolt damper pattern.  SB, BB and Hemi engines.

Dealers: Mancini Racing, Hughes Engines, Richard Ehrenberg