C-body, 1965-1973
Part No.: AR071
Price: $85
Description:
AR071 – C-body hanger. Fits 1965 to 1973 C-body cars except for station wagon. 0.188 material, zinc yellow plating, OEM hardware, dual location eye bolt hole to lower the car by one-inch.
Used With: AR107, AR072, AR073
Dealers: Mancini Racing
Reinforcement plates, B-body
Part No.: AR107
Price: $30
Description:
Part number AR107 is a pair of hanger reinforcement plates for B-body and C-body cars. These reinforcement plates mount on the inside of the hanger box area to add stiffness to this critical part of the chassis. Similiar to the hanger reinforcement plates used by the factory on Hemi cars.
The AR107 plates can also be used to adjust the axle thrust angle. Simply place a spacer between the spring hanger and the chassis to move the axle housing back on that side of the vehicle. This can be used to move the axle housing into proper alignment, or it can be used to create additional rear steer for circle track applications.
Dealers: Mancini Racing, Bob Mazzolini Racing, Doctor Diff, Firm Feel, Richard Ehrenberg
Reinforcement plates, A/E body
Part No.: AR108
Price: $30
Description:
Part number AR108 is a pair of hanger reinforcement plates for A-body and E-body cars. These reinforcement plates mount on the inside of the hanger box area to add stiffness to this critical part of the chassis. Similiar to the hanger reinforcement plates used by the factory on Hemi cars.
The AR108 plates can also be used to adjust the axle thrust angle. Simply place a spacer between the spring hanger and the chassis to move the axle housing back on that side of the vehicle. This can be used to move the axle housing into proper alignment, or it can be used to create additional rear steer for circle track applications.
Dealers: Mancini Racing, Firm Feel, Richard Ehrenberg
A-body with Oval Track springs
Part No.: AR118
Price: $85
Description:
AR118 is the correct length to mount the Mopar Peformance Oval Track springs on any 1962-1976 A-body car. The Mopar Performance P4529414 and P4529415 Oval Track springs have a unique front segment length of 20.50 inches. These hangers are 0.5-inches shorter than the AR013 A-body hangers in order to properly work with the longer Oval Track springs. Made from 0.188 steel, zinc plated, dual eye-bolt location and OEM quality hanger studs. Use AR108 hanger reinforcement plates for best results.
Used With: AR108, AR072, AR073
Dealers: Mancini Racing
FMJ body with 22 inch front segment
Part No.: AR110
Price: $100
Description:
AR110 is an extra length hanger for the FMJ body cars. It allows the use of an E-body 57 inch long leaf spring with a 22 inch front segment. 0.250 material, zinc plated, dual eye-bolt location, OEM hanger studs. Use with AR107 for best results.
Used With: AR107
Dealers: Mancini Racing
FMJ body
Part No.: AR109
Price: $85
Description:
AR109 is a replacement hanger for the FMJ body cars. 5/8 eyebolt hole for standard leaf springs. 0.188 steel, zinc plated. Combine with AR107 for best results.
Used With: AR107
Dealers: Mancini Racing
1964-65 Plymouth B-body with E-body springs
Part No.: AR105
Price: $100
Description:
AR105 is for the 1964-65 Plymouth B body cars with E-body (22 inch front segment) springs. This is a very short spring hanger and it only has enough room for one eye bolt hole. Hangers are made from 0.188 steel, zinc plated for corrosion resistance, and use OEM quality hanger studs. Use AR107 hanger reinforcement plates for best results.
Used With: AR107
Dealers: Mancini Racing
E-body with Super Stock springs
Part No.: AR104
Price: $100
Description:
AR100 is an extra length spring hanger for E-body cars with Super Stock springs. 0.250 material, zinc plated, dual eye-bolt location, OEM hanger studs. Use AR108 hanger reinforcement plates for best results.
Used With: AR108
Dealers: Mancini Racing
1966-70 Plymouth B-body, SS springs
Part No.: AR100
Price: $100
Description:
AR100 hanger is for 1966-70 Plymouth B body cars with Super Stock springs. 0.250 material, dual eye bolt location, zinc plated, OEM hanger studs. Use AR107 hanger reinforcement plates for best results.
Used With: AR107
Dealers: Mancini Racing
1966-70 Dodge B-body, SS springs
Part No.: AR099
Price: $100
Description:
Two inches longer than stock to fit 1966-70 Dodge B body cars with Super Stock springs. 0.250 material, dual eye bolt locations, OEM hanger studs. For best results use AR107 hanger reinforcement plates.
Used With: AR107
Dealers: Mancini Racing
1964-65 Plymouth B-body
Part No.: AR098
Price: $85
Description:
The AR098 hanger is a 1964-65 Plymouth B-body stock replacement spring hanger for use with 21 inch front segment springs. Hangers are made from heavy duty 0.188 steel, zinc plated for corrosion resistance and have the correct OEM type hanger studs installed. Use AR107 hanger reinforcement plates for best results.
The AR098 hanger can also be used as a conversion hanger to install E-body (22 inch front segment) leaf springs into 1964-65 Dodge B body cars. AR098 can also be used to lower the ride height on the 1971-72 B body cars. AR098 lowers the ride height 0.400 compared to the AR094 hanger
Used With: AR107
Dealers: Mancini Racing
1964-70 Dodge B-body
Part No.: AR097
Price: $85
Description:
Spring hangers for 1964-70 Dodge B body with stock length front segment springs. Made from thicker 0.188 material, zinc plated for corrosion resistance and has correct OEM quality hanger studs pressed in place. Dual eye-bolt holes provide for stock ride height and one-inch lower ride height. Use the AR107 hanger reinforcement plates for best results.
The AR097 hanger can also be used to install Super Stock springs on the 1964-65 Plymouth B body cars.
Used With: AR107
Dealers: Mancini Racing
1966-70 Plymouth B-body
Part No.: AR095
Price: $85
Description:
AR095 spring hanger set for 1966-70 Plymouth B body with stock length 22 inch front segment springs. 0.188 material, zinc plated with correct OEM quality hanger studs. Use AR107 reinforcement plates for best results.
Used With: AR107
Dealers: Mancini Racing
1962-63 B-body
Part No.: AR094
Price: $85
Description:
1962-63 B body car with stock 20 inch front spring segment. Also works with Super Stock springs on the ’62-’63 B-body cars. AR094 will also fit 1971-72 B body cars with stock 22 inch front segment springs. Hangers are made from 0.188 steel, are zinc plated and have OEM quality hanger studs installed. Use with AR107 reinforcement plates for best results.
Used With: AR107
Dealers: Mancini Racing
1964-65 Dodge B-body, SS springs
Part No.: AR015
Price: $100
Description:
1964-65 Dodge B body with Super Stock springs. 0.250 material. Hanger is one-inch longer than stock so the shorter SS springs will fit properly. 1964-1965 B-body cars use a leaf spring with a 21 inch front segment. The Super Stock springs have a 20 inch front segment so the spring hanger needs to be one-inch longer. These hangers are the correct length and they have a second eye-bolt hole so the ride height can be lowered by about one inch.
Used With: AR107, AR072, AR073
Dealers: Mancini Racing
Products » E-body Spring Hanger
AR035 E-body spring hanger. Replacement hanger with dual location 5/8 diameter eye bolt. Made from 0.188 steel, zinc plated. Uses OEM quality hanger studs. Lower eye bolt location is stock ride height, upper location lowers the car bay about 1 inch at the rear axle. Add the AR108 hanger reinforcement plates for extra strength.