Part No.: AR431

Price: $125

Description:

AR431 is a race style shock plate kit complete with weld on double shear shock mounts. The weld on shock mounts use a 1/2 inch diameter bolt as the lower shock mount. The lower shock mount holds the shock on each side (double shear) rather than the stock pin style mount. The shock mount is loose in the kit and needs to be welded into the correct location to provide the proper shock travel for the car.

Dealers: Mancini Racing, Hughes Engines, Bob Mazzolini Racing

Part No.: AR434

Price: $100

Description:

AR434 is a replacement shock plate designed to accept the bolt in shock stud from Mancini Racing. The MRE 35511 shock stud bolts, or welds, onto this plate to provide the proper shock mount. The MRE shock stud can be turned down to work with a shock that has a smaller eye size such as the Koni shocks. The AR434 shock plate has a built in tie down eye and is made from 0.250 thick steel.

Dealers: Mancini Racing, Hughes Engines, Bob Mazzolini Racing

Part No.: S188

Price: $20

Description:

S188 covers the hole left in the firewall when removing the wiper motor on an A-body car. Made from powder coated aluminum the cover bolts in place using the existing hardware.

Dealers: Mancini Racing, Hughes Engines, Bob Mazzolini Racing

Part No.: AR134EFI

Price: $55

Description:

AR134EFI is designed to adapt a Mopar throttle cable to an aftermarket throttle body. The AR134EFI bracket has a Z type bend to move the throttle cable up and out of the way of the fuel rail. Designed for the Holley 4150 type throttle body it should also work with other 4150 style throttle bodies.

Dealers: Mancini Racing, Hughes Engines, Bob Mazzolini Racing, Fast Man EFI

Part No.: AR065

Price: $350

Description:

AR065 is a trigger wheel and pulley combination that fits with a stock Mopar big block water pump and pulley.  AR065 consists of both the 36-1 trigger wheel and the deep groove pulley. Designed to work with ATI 917122E damper. Use with AR226K sensor bracket kit.

Used With: AR226K

Dealers: Mancini Racing, Hughes Engines, Bob Mazzolini Racing, Fast Man EFI

Part No.: AR226M

Price: $150

Description:

AR226M is a trigger wheel pickup bracket assembly that fits a stock timing cover or the AR224 billet cover. The sensor bracket has a M12 x 1 thread for the Holley 554-124 sensor. This bracket kit bolts directly to the AR224 billet timing cover or can be used with a stock timing cover by using the included spacers. Designed to fit the 917122E ATI damper. AR226M is designed to work with the AR065 wheel and pulley combo, but it can also be used with the AR402DM trigger wheel.

Used With: AR065, AR402DM

Dealers: Mancini Racing, Hughes Engines, Bob Mazzolini Racing, Fast Man EFI